MACHINE FOR ELECTRIC TEST, CHECK OF THE PRESENCE OF THE COMPONENTS, LEAK TEST, MARKING BY ENGRAVING WITH HOT PUNCH AND AUTOMATIC UNLOADING OF THE FAULTY ARTICLES INTO A RED-BOX
Semiautomatic machine for testing and marking of a tank. Presence and position checks of the components, electrical test, leak test with positive pressure and marking by hot engraving of the good articles.
machine for testing and marking
the fixture
marking by engravig device
reservoir in the blocking dies
-
MACHINE FOR TESTING AND MARKING OF TANKS
GENERAL CHARACTERISTICS
- 01 automatic working station with single blocking die
- manual loading and unloading of the tank
- manual insertion of the electrical test’s device
OPERATION OF THE AUTOMATIC STATION
- presence check and blocking of the tank
- presence check of component WT and pump 01 by means of pneumatic feeler pin for the automatic recognition of the tank’s version
- presence and position check of all the pre-assembled components by means of feeler pin
- electrical test: checking of the absorption of the starting current on 02 pumps
- airtight sealing of the tank
- airtight sealing of 02 pumps
- leak test with positive pressure of the tank
- marking by hot engraving of the tanks that pass the leak test with 04 different letters according to the tank’s version
- automatic unloading of the faulty articles into a red box
- good article signalled by a green light; faulty article signalled by a red light
-