ROTARY TABLE FOR CUTTING THE ENDS, DRILLING, HOT-PLATE WELDING, CLEANING, LEAK TESTING AND MARKING BY ENGRAVING OF A PIPE
Transfer with rotary table with 4 working station for the finishing of pipes of thermoplastic material. Cutting of the ends, hot-plate welding, punching, cleaning, leak test with positive pressure, marking.
rotary table the finishing of pipes
rotary table the finishing of pipes
fixture for cutting, drilling, welding, punching, cleaning, testing, marking
-
ROTARY TABLE FOR THE FINISHING OF PIPES
GENERAL CHARACTERISTICS
- 4 working stations
- transfer of the article from one station to the next one by means of a rotary table
OPERATIONS
- station 01: blocking of the pipe and placing of the little connection pipe in the clamp
- station 02: cutting of the ends and drilling of the pipe with extraction of the chip
- station 03: hot-plate welding of the little connection pipe to the pipe, punching and cleaning of the pipe with blow of ionized air and suction of the chips
- station 04: leak test with positive pressure, marking by engraving of the good articles and ink-pad marking of the faulty articles
-
