MACHINING SYSTEM WITH VERTICAL TRANSFER WITH COOLING DIES AND BLOW OF CHILL AIR, FOR CUTTING THE ENDS, MILLING, INSERTING RINGS, CLEANING WITH TOOL AND THERMO-SHRINKING OF THE FLASHES OF A PIPE
Machining system with vertical transfer with 02 specular automatic stations for conformal cooling, cutting of ends, milling, inserting of metal rings and cleaning with ionized air of a pipe.
-
MACHINING SYSTEM WITH VERTICAL TRANSFER FOR THE FINISHING OF PIPES
GENERAL CHARACTERISTICS
- 02 automatic working stations (left and right) with single blocking die for the same finishing operations
- vertical translation of the pipe by means of 02 electrical elevators
- automatic feeding of metal rings by means of vibratory feeder
- vibratory feeder feeded by a conveyor belt supplied with hopper
- manual loading of the metal rings into the hopper
OPERATIONS OF THE AUTOMATIC STATIONS
- presence check and blocking of the pipe
- conformal cooling of the pipe
- translation of the pipe towards the cutting unit
- saw cutting of 01 end and suction of the chips
- translation of the pipe towards the milling unit
- internal milling with orbital boring unit of 01 end and suction of the chips
- translation of the pipe towards the tumbling and deburring unit
- internal tumbling and outer deburring of 01 end
- translation of the pipe towards inserting unit
- pressure insertion of 01 metal ring at one end
- internal cleaning of the pipe with blow of ionized air and suction of the chips
- end of cycle signalled to the anthropomorphic robot in charge of loading/unloading operations
-