FIXTURE FOR WALL-THICKNESS MEASUREMENT OF THE ENDS, BALL TESTING, DRILLING AND HOT-PLATE WELDING OF COMPONENTS ON PIPE A FOR MACHINE GS-013-TL
Dimensional checks, flow tests, drilling with fingernail-shaped tool and hot-plate welding of pipes. Fixture inserted in a standard machine with interchangeable fixture GS-013-TL.
-
FIXTURE FOR TESTING, DRILLING, HOT-PLATE WELDING
GENERAL CHARACTERISTICS
- 02 automatic working stations with single blocking die
- customized fixture inserted in a standard machine with interchangeable fixture GS-013-TL
OPERATIONS OF AUTOMATIC STATION 01
- presence check and blocking of the pipe
- measurement of the wall thickness at both ends of the pipe
- flow test by means of ball test
- good article signalled by a green light; faulty article signalled by a red light
- lifting of the good article to facilitate the next loading
OPERATIONS OF AUTOMATIC STATION 02
- presence check and blocking of the pipe
- presence check of 02 components
- 02 drilling processes with fingernail-shaped tool for the extraction of the chip to create the seats of 02 component and checking of the extraction
- hot-plate welding with mechanical stoppers of component 01
- hot-plate welding with mechanical stoppers of component 02
- during the welding of component 01, presence check of the seat of component 02
- during the welding of component 02, presence check of the seat of component 01
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the finished pipe from station 02
- transferring of the semi-finished pipe from station 01 to station 02
- loading of the pipe to finish on station 01
- loading of 02 components on the welding unit of station 02
- starting of the cycle
-
-