FIXTURE FOR ROUND CUTTING OF ONE END, CUTTING OF THE MOULD JOINT WITH COPYING OF THE PROFILE, DRILLING, HOT PLATE WELDING, LEAK TESTING, PUNCHING, INTERNAL CLEANING AND MARKING BY ENGRAVING OF A PIPE FOR MACHINE

FIXTURE FOR TOOLING, HOT PLATE WELDING, TESTING AND MARKING OF A PIPE

GENERAL CHARACTERISTICS

• 03 automatic working stations with single blocking die
• customized fixture for machine with interchangeable fixture GS-013-TL

OPERATIONS OF AUTOMATIC STATION 01

• presence check and blocking of the pipe
• cutting of the end on the round side
• cutting of the moulding joint with copying of the profile
• punching of a reference notch of the round end
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 02

• presence check and blocking of the pipe
• drilling with fingernail-shaped tool for the extraction of the chip and checking of the extraction
• hot plate welding with automatic adjustment of welding parameters of 01 connector on the pipe
• cleaning of the pipe by means of blow of ionized air and suction of the chips
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 03

• presence check and blocking of the pipe
• leak test with positive pressure on the pipe
• marking by engraving of a dot on the good articles
• good article signalled by a green light; faulty article signalled by a red light

MANUAL OPERATIONS

• unloading of the machined pipe from station 03
• transferring of the semi-finished pipe from station 02 to station 03
• transferring of the semi-finished pipe from station 01 to station 02
• loading of a pipe to machine on station 01
• loading of 01 union to weld on station 02
• starting of the automatic cycle