FIXTURE FOR PUNCHING, DRILLING, HOT PLATE WELDING, INTERNAL CLEANING, LEAK TESTING AND MARKING OF A PIPE FOR MACHINE GS-014-TL
Fixture for punching, drilling, hot plate welding, testing and marking of a pipe for machine with interchangeable fixture GS-014-TL.
-
FIXTURE FOR TOOLING, HOT PLATE WELDING, TESTING AND MARKING OF PIPE
GENERAL CHARACTERISTICS
- 03 automatic working stations with single blocking die
- customized fixture for machine with interchangeable fixture GS-014-TL
OPERATIONS OF AUTOMATIC STATION 01
- presence check and blocking of the pipe
- punching of the reference notch on the pipe
- drilling with fingernail-shaped tool for the extraction of the chip to create the seat of 01 connector and checking of the extraction
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 02
- presence check and blocking of the pipe
- hot plate welding of 01 connector on the pipe
- internal cleaning of the pipe by means of blow of ionized air and suction of the chips
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 03
- presence check and blocking of the pipe
- leak test with positive pressure on the pipe
- ink pad marking of the good articles
- additional marking of the good articles by engraving of a dot
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the machined pipe from station 03
- transferring of the semi-finished pipe from station 02 to station 03
- transferring of the semi-finished pipe from station 01 to station 02
- loading of a pipe to machine on station 01
- loading of 01 union to weld on the welding unit of station 02
- starting of the automatic cycle
-