FIXTURE FOR ELECTRICAL TEST, ASSEMBLY, LEAK TEST AND INK JET MARKING OF A WINDSHIELD WASHER BOTTLE FOR MACHINE GS-013-TCA
Fixture for presence check, electrical test, leak test, pressure insertion of components and ink jet marking of a washer bottle for machine with interchangeable fixture GS-013-TCA.
-
FIXTURE FOR TESTING, ASSEMBLY, INK-JET MARKING
GENERAL CHARACTERISTICS
- 01 automatic working station with single blocking die
- customized fixture for machine with interchangeable fixture GS-013-TCA
OPERATIONS
- presence check and blocking of the washer bottle
- presence check of 02 holes in the fastening points
- electrical test on pump 01 (only dry-run electrical test)
- electrical test on pump 02 (only dry-run electrical test)
- electrical test on 01 sensor before it is inserted into the washer bottle
- pressure insertion of 02 pumps into the washer bottle
- pressure insertion of 01 sensor intp the washer bottle
- presence check of the sensor’s nose after the insertion by means of a sensor operating through the washer bottle’s wall
- pressure insertion of 01 rubber grommet on the right side of the washer bottle
- sealing of the upper outlet by means of a punch to check the absence of obstruction
- leak test with positive pressure on the washer bottle
- leak test with positive pressure on 02 pumps
- pressure insertion of 01 flexible tube into the upper outlet
- ink jet marking of the good articles
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the correctly machined washer bottle
- unloading and transferring of the faulty article in the hole located on the fixture’s plane
- loading of 01 tank to machine with all its gaskets
- loading of 01 sensor
- loading of 02 pumps and blocking of their tubes in the respective hooking points
- loading of 01 rubber grommet
- loading of 01 flexible tube
- starting of the automatic cycle
-
-