FIXTURE FOR ELECTRIC TESTS OF PUMPS AND LEVEL SENSOR, ASSEMBLY, PRESENCE CHECK OF COMPONENTS, FLOW TEST OF TUBES, LEAK TEST AND MARKING BY ENGRAVING OF A WASHERBOTTLE FOR MACHINE GS-013-TCA
Electrical tests on pumps and level sensor, pressure insertion of level sensor and pumps into the reservoir, presence check of the sensor’s toe, leak test on reservoir and pumps, marking by engraving. Fixture inserted in a standard machine with interchangeable fixture GS-013-TCA.
fixture for tests, assembly, marking
fixture for tests, assembly, marking
flow tests
-
FIXTURE FOR TESTING, ASSEMBLING, MARKING OF A WINDSCREEN WASHER FLUID RESERVOIR
GENERAL CHARACTERISTICS
- 01 automatic working station with single blocking die
- customized fixture inserted in a standard machine with interchangeable fixture GS-013-TCA
OPERATIONS OF THE AUTOMATIC STATION
- presence check and locking of the reservoir
- presence check of the 3 holes matching the fastening points
- electrical test on pump 01 (only dry-type electrical test)
- electrical test on pump 02 (only dry-type electrical test)
- electrical test on the level sensor before it is inserted into the reservoir
- pressure insertion of pump 01 and pump 02
- pressure insertion of the level sensor
- presence check of the level sensor’s toe after the insertion by means of a sensor
- leak test on the reservoir
- leak test on the pumps
- marking by engraving
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the finished reservoir
- loading of a reservoir to finish
- loading of a level sensor
- loading of pump 01 and pump 02 and fastening of the pipe of one of the pumps to the fastening points
- starting the automatic cycle
- preparation of another reservoir to finish
-
-
