FIXTURE FOR DRILLING AND HOT PLATE WELDING OF A WINDSHIELD WASHER BOTTLE FOR MACHINE GS-013-TL
Fixture for drilling with fingernail-shaped tool and hot plate welding with automatic adjustment of the welding parameters of three components on a windshield washer bottle for machine GS-013-TL.
-
FIXTURE FOR DRILLING AND HOT PLATE WELDING OF A WINDSHIELD WASHER BOTTLE
GENERAL CHARACTERISTICS
- 03 automatic working stations with single blocking die
- customized fixture for machine with interchangeable fixture GS-013-TL
OPERATIONS OF AUTOMATIC STATION 01
- presence check and blocking of the washer bottle
- presence check of the pin for the gasket
- drilling with fingernail-shaped tool for the extraction of the chip to create the pump’s seat and checking of the extraction
- drilling with fingernail-shaped tool for the extraction of the chip to create the filler pipe’s seat and checking of the extraction
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 02
- presence check and blocking of the reservoir
- hot plate welding with automatic adjustment of the welding parameters of the sensor on the washer bottle
- hot plate welding with automatic adjustment of the welding parameters of the upper cap on the washer bottle
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 03
- presence check of 02 squared fastener holes by means of fixed pins on the blocking die
- presence check and blocking of the washer bottle
- presence check of the filler pipe’s seat
- hot plate welding with automatic adjustment of the welding parameters of the filler pipe on the washer bottle
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the machined washer bottle from station 03
- transferring of the semi-finished washer bottle from station 02 to station 03
- transferring of the semi-finished washer bottle from station 01 to station 02
- loading of a washer bottle to machine on station 01
- loading of 01 sensor, 01 cap and 01 filler tube on the respective welding units
- starting of the automatic cycle
-