• it
  • en
  • de

FIXTURE FOR DRILLING AND HOT-PLATE WELDING AT THE SAME TIME A FLANGE ON AN ELBOW-CONNECTOR, THE ELBOW-CONNECTOR ON A PIPE, A SECOND FLANGE ON A PIPE FOR MACHINE GS-013-TL

Fixture with 02 automatic stations for checking the presence of components, drilling with fingernail-shaped tool and simultaneous hot-plate welding. Customized fixture inserted in a standard machine with interchangeable fixture GS-013-TL.

  • fixture for simultaneous drilling and hot-plate welding
    fixture for simultaneous drilling and hot-plate welding
  • fixture for simultaneous drilling and hot-plate welding
    fixture for simultaneous drilling and hot-plate welding
  • FIXTURE FOR SIMULTANEOUS DRILLING AND HOT-PLATE WELDING OF PIPES

     

    GENERAL CHARACTERISTICS
    • 02 automatic working stations with single blocking die
    • customized fixture inserted in a standard machine with interchangeable fixture GS-013-TL

     

    OPERATIONS OF AUTOMATIC STATION 01
    • presence check and blocking of the elbow-connector
    • presence check of the metal insert of the elbow-connector
    • presence check of the spring of the flange
    • hot-plate welding with mechanical stoppers of the flange
    • good article signalled by a green light; faulty article signalled by a red light
    • lifting of the good article to facilitate the next loading

     

    OPERATIONS OF AUTOMATIC STATION 02
    • presence check and blocking of the blown article
    • presence check of the spring of the semi-finished article from station 01
    • presence check of the spring of the flange
    • presence check of 02 metal bushings of the rubber seal of the bracket
    • hot-plate welding with mechanical stoppers of the semi-finished article from station 01
    • hot-plate welding with automatic stoppers of the flange
    • hot-plate welding with automatic stoppers of the bracket
    • drilling with fingernail-shaped tool for the extraction of the chip to create the connector’s seat and checking of the extraction by means of electrical sensor
    • hot-plate welding with mechanical stoppers of the connector
    • good article signalled by a green light; faulty article signalled by a red light

     

    MANUAL OPERATIONS
    • unloading of the finished article from station 02
    • transferring the semi-finished article from station 01 to the welding pliers of station 02
    • loading of the articles on station 01 and station 02
    • loading of 01 component to weld on station 01
    • loading of 02/03 components to weld on station 02 according to the version of the pipe to produce
    • starting the automatic cycle
  • tubo e componenti da lavorare
Icons made by freepik from www.flaticon.com