FIXTURE FOR CUTTING THE ENDS WITH COPYING OF THE PROFILE AND PUNCHING OF A PIPE FOR MACHINE GS-014-TL
Fixture with 02 automatic stations for cutting of the ends with copying of the profile and punching of pipes. Customized fixture inserted in a standard machine with interchangeable fixture GS-014-TL.
-
FIXTURE FOR CUTTING THE ENDS WITH COPYING OF THE PROFILE AND PUNCHING OF A PIPE
GENERAL CHARACTERISTICS
- 02 automatic working stations with single blocking die
- customized fixture inserted in a standard machine with interchangeable fixture GS-014-TL
AUTOMATIC STATION 01
- presence check and blocking of the pipe
- cutting of both ends with copying of the profile by means of a rotating motorised boring tool that carries out clear cuts without producing any burrs or shavings
- conveying of the cut ends towards the lower part of the machine by means of a chute
- good article signalled by a green light; faulty article signalled by a red light
AUTOMATIC STATION 02
- presence check and blocking of the pipe
- punching of 03 slots with the joined corner on the rectangular side
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the finished pipe from station 02
- transferring of the semi-finished pipe from the die of station 01 to the die of station 02
- loading of the pipe to finish on the die of station 01
- starting of the automatic cycle
-
-