FIXTURE FOR CUTTING OF ENDS, DRILLING, HOT PLATE WELDING, LEAK TESTING, INTERNAL CLEANING AND MARKING OF A PIPE FOR MACHINE

FIXTURE FOR TOOLING, HOT PLATE WELDING, TESTING AND MARKING OF A PIPE

GENERAL CHARACTERISTICS

• 04 automatic working stations with single blocking die
• customized fixture for machine with interchangeable fixture GS-014-TL

OPERATIONS OF AUTOMATIC STATION 01

• presence check and blocking of the pipe
• cutting of the bigger end
• drilling to create the seats of 02 coupled blow-byes
• punching to create a reference notch at the bigger end
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 02

• presence check and blocking of the pipe
• cutting of the smaller end
• drilling to create the seats of 02 blow-byes
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 03

• presence check and blocking of the pipe
• hot plate welding of 04 blow-byes on the pipe by means of 03 welding units, the double one of which for the coupled blow-byes
• punching to create a reference notch at the smaller end
• internal cleaning of the pipe by means of blow of ionized air and suction of the chips
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 04

• presence check and blocking of the pipe
• leak test with positive pressure on the pipe
• ink pad marking of the good articles
• additional marking of the good articles by engraving of a dot
• good article signalled by a green light; faulty article signalled by a red light

MANUAL OPERATIONS

• unloading of the machined pipe from station 04
• transferring of the semi-finished pipe from station 03 to station 04
• transferring of the semi-finished pipe from station 02 to station 03
• transferring of the semi-finished pipe from station 01 to station 02
• loading of a pipe to machine on station 01
• starting of the automatic cycle