FIXTURE FOR CUTTING OF ENDS, DRILLING, HOT PLATE WELDING, INTERNAL CLEANING, LEAK TESTING AND MARKING OF A PIPEFOR MACHINE

FIXTURE FOR TOOLING, HOT PLATE WELDING, TESTING AND MARKING OF PIPE

GENERAL CHARACTERISTICS

• 03 automatic working stations with single blocking die
• customized fixture for machine with interchangeable fixture GS-013-TL

OPERATIONS OF AUTOMATIC STATION 01

• presence check and blocking of the pipe
• cutting of 02 ends
• drilling with fingernail-shaped tool for the extraction of the chip to create the seat of 01 blow-by and checking of the extraction
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 02

• presence check and blocking of the pipe
• hot plate welding with monitoring of the measure of 01 blow-by on the pipe with presence check of the hole for the blow-by’s seat
• internal cleaning of the pipe by means of blow of ionized air and suction of the chips
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 03

• presence check and blocking of the pipe
• leak test with positive pressure on the pipe
• marking by engraving of a dot on the good articles
• good article signalled by a green light; faulty article signalled by a red light

MANUAL OPERATIONS

• unloading of the machined pipe from station 03
• transferring of the semi-finished pipe from station 02 to station 03
• transferring of the semi-finished pipe from station 01 to station 02
• loading of a pipe to machine on station 01
• loading of 01 blow-by to weld on the welding unit of station 02
• starting of the automatic cycle