FIXTURE FOR CUTTING OF ENDS, DRILLING, HOT PLATE WELDING AND CLEANING OF A PIPE FOR MACHINE

FIXTURE FOR CUTTING, DRILLING, HOT PLATE WELDING AND CLEANING OF A PIPE

GENERAL CHARACTERISTICS

• 03 automatic working stations with single and double blocking die
• customized fixture for machine with interchangeable fixture GS-013-TL

OPERATIONS OF AUTOMATIC STATION 01 WITH SINGLE BLOCKING DIE

• presence check and blocking of the pipe
• cutting of the soft end
• drilling with fingernail-shaped tool for the extraction of the chip to create the seat of 01 coupling and checking of the extraction
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 02 WITH DOUBLE BLOCKING DIE

• presence check and blocking of the pipes
• drilling with fingernail-shaped tool for the extraction of the chip to create the seat of 01 blow-by and checking of the extraction
• presence check of the hole for the coupling’s seat
• hot plate welding of 01 coupling
• good article signalled by a green light; faulty article signalled by a red light

OPERATIONS OF AUTOMATIC STATION 03 WITH DOUBLE BLOCKING DIE

• presence check and blocking of the pipes
• presence check of the hole for the blow-by’s seat
• hot plate welding of 01 blow-by
• internal cleaning of the pipe by means of blow of ionized air and suction of the chips
• good article signalled by a green light; faulty article signalled by a red light

MANUAL OPERATIONS

• unloading of the machined pipe from station 03
• transferring of the semi-finished pipe from station 02 to station 03
• transferring of the semi-finished pipe from station 01 to station 02
• loading of a pipe to machine on station 01
• loading of 02 components to weld on the respective welding units
• starting of the automatic cycle