FIXTURE FOR CHECKING OF INTERNAL DIAMETER, BORING OF A RING’S SEAT, INSERTION OF A RING, DRILLING, HOT PLATE WELDING, LEAK TESTING, INTERNAL CLEANING AND INK-PAD MARKING OF A PIPE FOR MACHINE GS-014-TL
Fixture for tooling, assembling, hot plate welding, cleaning and ink pad marking of a pipe for machine GS-014-TL with double safety window.
-
FIXTURE FOR TOOLING, ASSEMBLING, HOT PLATE WELDING, TESTING AND MARKING OF A PIPE
GENERAL CHARACTERISTICS
- 03 automatic working stations with single blocking die
- customized fixture for machine with interchangeable fixture GS-014-TL with double safety window
OPERATIONS OF AUTOMATIC STATION 01
- presence check and blocking of the pipe
- internal boring and flattening at one end to create 01 metal ring’s seat
- 02 drilling processes with fingernail-shaped tool for the extraction of the chip and checking of the extraction
- dimensional check of the internal diameter by means of fitting/non-fitting plug test
- pressure insertion of 01 metal ring
- punching of the pawl on the female end
- lifting of the pipe to facilitate the next loading
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 02
- presence check and blocking of the pipe
- hot plate welding with automatic adjustment of welding parameters of 01 component on the pipe
- cleaning of the pipe by means of a blow of ionized air and suction of the chips
- good article signalled by a green light; faulty article signalled by a red light
OPERATIONS OF AUTOMATIC STATION 03
- presence check and blocking of the pipe
- leak test with positive pressure of the pipe
- ink pad marking of the batch number
- lifting of the pipe to facilitate the next loading
- good article signalled by a green light; faulty article signalled by a red light
MANUAL OPERATIONS
- unloading of the machined pipe from station 03
- transferring of the semi-finished pipe from station 02 to station 03
- transferring of the semi-finished pipe from station 01 to station 02
- loading of a pipe to finish on station 01
- loading of 01 component to weld on the welding unit of station 02
- loading of 01 metal ring on station 01
- starting of the automatic cycle