• it
  • en
  • de

TRIVALENT HOT-PLATE/INFRARED/SPIN WELDING MACHINE GS-001-HP+I+S-E

Trivalent hot-plate/infrared/spin welding machine with electric axis

  • trivalent welding machine
    trivalent welding machine
  • hot-plate welding device
    hot-plate welding device
  • infrared welding device
    infrared welding device
  • infrared welding device
    infrared welding device
  • spin welding device
    spin welding device
  • GS-001-HP+I+S-E
    TRIVALENT HOT-PLATE, LOCALIZED INFRARED AND SPIN WELDING, WITH ELECTRIC AXIS
    GENERAL CHARACTERISTICS
    • 1 working station with single or multiple blocking die
    • quick change of the welding fixture
    • automatic detection of the installed welding fixture
    • automatic loading of all the welding parameters
    • average equipping time: 15 minutes
    • possibility to store up to 256 welding recipes
    • simplified guided programming in logic order
    HOT-PLATE WELDING DEVICE
    • use of hot-plate with quick change sized and shaped according to the article and component to weld
    • maximum dimensions of the hot-plates: 300 mm x 200 mm
    • maximum temperature of the hot-plate: 500°
    • differential adjustment of the temperature on the article side and on the element side
    • minimum switch time for the joining after the end of the warming: lower than 1,5 seconds
    • automatic adaptation of the melting parameter of the article and of the joining parameter of the element, with elimination of the articles that do not comply with the coupling parameters and tolerances that have been set
    • possibility to change coupling parameters and tolerance on the operator panel
    • mechanical adjustment of the melting parameter of the element with possibility to carry out changes manually
    • pneumatic adjustment of the different melting and joining parameters of the components with the possibility to adjust them on the operator panel
    INFRARED WELDING DEVICE
    • maximum dimensions of the emitter: 300 mm x 200 mm
    • maximum temperature of the emitter: 500°
    • differential adjustment of the temperature on the article side and on the element side
    • minimum switch time for the joining after the end of the warming: lower than 1 second
    • automatic adaptation of the melting parameter of the article and of the joining parameter of the element, with elimination of the articles that do not comply with the coupling parameters and tolerances that have been set
    • possibility to change coupling parameters and tolerance on the operator panel
    • pneumatic adjustment of the different melting and joining parameters of the components with the possibility to adjust them on the operator panel.
    SPIN WELDING DEVICE
    • spindle rotation motor Brushless type
    • possibility of choosing the speed of the spindle’s rotation
    • possibility of choosing the quantity of the turns to carry out
    • possibility of choosing the welding: pressure-based, by monitoring of the measure or time-based
    • possibility of stopping the spindle in a defined angular position (+/- 1°)
    • possibility of varying the coupling measures and tollerance on the operator panel.
  • articolo saldatura ad infrarossi
    articolo saldatura a rotofrizione
Icons made by freepik from www.flaticon.com