HOT PLATE WELDING MACHINE GS-SMALL-HP-P
Hot plate welding machine small with pneumatic movement. Maximum dimensions of the hot-plate: 300 mm x 200 mm. Hot plate welding of most thermoplastics, including the most problematic. Quick change and automatic recognition of the installed welding fixture.
hot plate welding machine GS-SMALL-HP-P
hot plate welding machine GS-SMALL-HP-P
clamp
die
hot plate
-
GS-SMALL-HP-P
HOT PLATE WELDING MACHINE SMALL WITH PNEUMATIC MOVEMENT
GENERAL CHARACTERISTICS
- 1 working station with single or multiple blocking die
- average equipping time: 15 minutes
- automatic detection of the installed welding fixture
- automatic loading of all the welding parameters
- possibility to store up to 255 welding recipes
- possibility to carry out other finishing operations
- simplified guided programming in logic order
- module for remote assistance
- recommended for the welding of articles produced by means of injection moulding, extrusion moulding, compression moulding, thermoforming, blow moulding, suction 2d/3d (2k) and rotational moulding
HOT PLATE WELDING DEVICE
- quick change of blocking die, clamp and hot-plate
- use of hot-plate with quick change sized and shaped according to the article and component to weld
- maximum dimensions of the hot-plates: 300 mm x 200 mm
- differential adjustment of the temperature on the article side and on the element side
- maximum temperature of the hot-plate: 400° (beyond: upon request)
- minimum time of closing for melting after the end of the warming: < 2 seconds
- mechanical adjustment of the melting parameter of the element with possibility to carry out changes manually
- differential adjustment of the melting and joining pressures
-
-
