ORBITAL BORING MACHINE GS-061-D80
Tooling machine for the boring of holes and circular ends, both simple and complex in the case of shaped profiles and with undercut. Drilling of full surfaces with simultaneous boring. Creation of dead-end holes. Reaming of cylindrical ends, simple and complex in the case of shaped profiles and with undercut.
orbital boring machine
orbital boring machine
orbital boring machine
orbital boring machine
orbital boring machine
-
ORBITAL BORING MACHINE GS-061-D80
GENERAL CHARACTERISTICS
- 02 automatic working stations with single blocking die
- manual loading, transferring and unloading of the article
- orbital boring unit supplied with inlet for the suction of the boring chips
- maximum boring diameter: 80 mm (add the tool diameter to obtain the maximum boring diameter)
- possibility to adjust the boring profile and/or diameter by changing the boring tool and the boring radius
- operator touch panel
- mobile and ergonomic control pedestal
- manual transfer of the article from one station to the next one
- quick change of customized blocking dies and boring tools
- average equipping time: < 10 minutes
- automatic detection of the boring fixture installed
- module for the remote assistance
- boring of articles produced by means of injection moulding, extrusion moulding, compression moulding, thermoforming, blow moulding, suction 2d/3d (2k) and rotational moulding
OPERATIONS OF AUTOMATIC STATION 01
- presence check and blocking of the article
- internal shaped boring
OPERATIONS OF AUTOMATIC STATION 02
- presence check and blocking of the article
- internal shaped boring
-
-
