MACHINE WITH INTERCHANGEABLE FIXTURE GS-011-TL, GS-012-TL, GS-013-TL, GS-014-TL

GS-011-TL, GS-012-TL, GS-013-TL, GS-014-TL

MACHINE WITH INTERCHANGEABLE FIXTURE FOR ALL OPERATIONS

GENERAL CHARACTERISTICS

• possibility to use more than 250 different fixtures with the same machine
• operator touch panel
• automatic detection of the installed fixture
• automatic loading of the working parameters
• customized combination of the operations to carry out
• reduced price if compared to the use of fully customized machines
• module for the remote assistance
• finishing of articles produced by means of injection moulding, extrusion moulding, compression moulding, thermoforming, blow moulding, suction 2d/3d (2k) and rotational moulding

INDICATIVE DIMENSIONS OF USABLE WORKING PLANE TO INSERT THE FIXTURES

• GS-011-TL: 900 mm (width) x 800 mm (depth) x 1.000 mm (height)
• GS-012-TL: 1.400 mm (width) x 900 mm (depth) x 1.000 mm (height)
• GS-013-TL: 1.800 mm (width) x 1.000 mm (depth) x 1.200 mm (height)
• GS-014-TL: 2.500 mm (width) x 1.300 mm (depth) x 1.300 mm (height)

SOME OF THE FINISHING OPERATIONS THAT CAN BE CARRIED OUT

• hot-plate welding with mechanical stoppers and/or with automatic adaptation of the melting and joining parameters
• welding with localized infrared
• spin-welding
• ultrasonic welding
• hot riveting or ultrasonic riveting
• drilling with extraction of the chip disk
• boring
• milling
• cutting of ends and co-moulding joints
• punching
• customized assembly
• leak tests with positive/negative pressure
• presence and position checks
• electric and electronic tests
• dimensional checks
• cleaning with blow of ionized air
• marking by engraving of the good articles
• other kinds of marking on request (ink-jet marking, marking by hot engraving, micro percussion marking, laser marking, labelling)