MACHINE WITH INTERCHANGEABLE FIXTURE GS-011-TCA, GS-012-TCA, GS-013-TCA, GS-014-TCA
Machine with interchangeable fixture for tests and assembly of thermoplastic articles. Base frame available in four versions of different size depending on the dimensions of the article and the number of operations to carry out.
-
GS-011-TCA, GS-012-TCA, GS-013-TCA, GS-014-TCA
MACHINE WITH INTERCHANGEABLE FIXTURE FOR TESTS AND ASSEMBLY
GENERAL CHARACTERISTICS
- possibility to use more than 250 different fixtures with the same machine
- operator touch panel
- automatic detection of the installed fixture
- automatic loading of the working parameters
- reduced price if compared to the use of fully customized machines
- module for the remote assistance
- testing of articles produced by means of injection moulding, extrusion moulding, compression moulding, thermoforming, blow moulding, suction 2d/3d (2k) and rotational moulding
INDICATIVE DIMENSIONS OF USABLE WORKING PLANE TO INSERT THE FIXTURES
- GS-011-TCA: 900 mm (width) x 800 mm (depth) x 1.000 mm (height)
- GS-012-TCA: 1.400 mm (width) x 900 mm (depth) x 1.000 mm (height)
- GS-013-TCA: 1.800 mm (width) x 1.000 mm (depth) x 1.200 mm (height)
- GS-014-TCA: 2.500 mm (width) x 1.300 mm (depth) x 1.300 mm (height)
OPERATIONS THAT CAN BE CARRIED OUT
- customized assembly
- dimensional checks
- presence and position checks
- electric and electronic tests
- leak tests with positive/negative pressure
- functionality test
- endurance tests
- cleaning with blow of ionized air
- marking by incision of the good articles
- other kinds of marking on request (ink-jet marking, marking by hot engraving, micro percussion marking, laser marking, labelling)
-